top of page


Public·12 members

Creation Pcut Ct630 Driver Windows 7

Creation Pcut Ct630 Driver Windows 7

The Creation Pcut Ct630 is a vinyl cutter that can be used for various applications such as sign making, sticker printing, heat transfer, and more. It has a cutting width of 630 mm and a cutting speed of up to 800 mm/s. It supports various cutting software such as CorelDraw, Illustrator, and CoCut. However, to use the Creation Pcut Ct630 with Windows 7, you need to install the correct driver for it.


Where to download the driver

There are several sources where you can download the driver for the Creation Pcut Ct630. One of them is the official website of USCutter, which is the distributor of the Creation Pcut series in the US. You can find the driver download link [here]. The file name is and it contains the setup application for the driver. You can also find the setup guides for different versions of Windows on the same page.

Another source is the website of CoCut, which is a cutting software that can work with the Creation Pcut Ct630. You can find the driver download link [here]. The file name is PCUT_CT630.ecd and it is a single file that you need to copy to the Cutter folder of your CoCut installation. You can also find a list of other drivers for different vinyl cutters on the same page.

A third source is the USCutter Forum, where you can find helpful tips and troubleshooting from other users of the Creation Pcut Ct630. You can find a forum thread about the driver installation [here]. You can read the posts and comments from other users who have experienced similar issues or solved their problems with the driver.

How to install the driver

The installation process may vary depending on which source you download the driver from and which version of Windows you are using. However, here are some general steps that you can follow:

  • Download the driver file from one of the sources mentioned above and save it to your computer.

  • Unzip or extract the file if it is compressed.

  • Connect your Creation Pcut Ct630 to your computer via USB cable.

  • Turn on your Creation Pcut Ct630 and make sure it is in online mode.

  • If your computer automatically installs an FTDI driver (some Windows 7 and Windows 8 systems will do this successfully) then proceed to use it. The FTDI driver will show up as a COM port under Ports (COM & LPT) in your Device Manager. You can skip to step 9.

  • If your computer does not install an FTDI driver automatically, then run the setup application for the driver that you downloaded from USCutter or CoCut. Follow the instructions on the screen to complete the installation.

  • After installing the driver, go to your Device Manager and look for a device named USB-SERIAL CH340 under Other Devices or Ports (COM & LPT). This is your Creation Pcut Ct630 device.

  • Right-click on the device and select Update Driver Software. Choose Browse my computer for driver software and then Let me pick from a list of device drivers on my computer. Select USB Serial Converter from the list and click Next. Wait for the installation to finish.

  • Now you should see a new device named USB Serial Port under Ports (COM & LPT) in your Device Manager. This is your Creation Pcut Ct630 COM port. Note down its number (e.g. COM3).

  • Open your cutting software (e.g. CorelDraw, Illustrator, CoCut) and select your Creation Pcut Ct630 as your cutter device. Make sure you choose the correct COM port number that matches your device.

  • You are now ready to use your Creation Pcut Ct630 with Windows 7.

Troubleshooting tips

If you encounter any problems with using your Creation Pcut Ct630 with Windows 7, here are some tips that may help you:

  • Make sure you have installed the correct driver for your device and your version of Windows.

  • Make sure you have selected the correct COM port number for your device in your cutting software.

  • Make sure your device is in online mode and not in offline or test mode.

  • Make sure your USB cable is securely connected to your device and your computer.

  • Try using a different USB port on your computer or a different USB cable.

  • Try restarting your computer or your device.

  • Try using an older version of the FTDI driver if the latest one does not work for you.

  • Try using a different cutting software or a different cutter device to see if the problem is with your software or your device.

  • Visit the USCutter Forum or the CoCut website for more help and support from other users and experts.

I hope this article has helped you to install and use your Creation Pcut Ct630 with Windows 7. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading!


Welcome to the group! You can connect with other members, ge...
Group Page: Groups_SingleGroup
bottom of page